Casio IT-2000W Spezifikationen PDF herunterladen (Seite 156)

156

Note on the simulation:

As explained previously, this simulator does not exactly simulate the IT-2000 operations. Moreover,

some operations can not be simulated because of the difference between the IT-2000 and personal

computer in terms of the hardware.

Restrictions regarding the COM port

The operation of the COM port (8-pin) of the IT-2000 can be programmed in the same way as

for the COM1 port of the IBM PC/AT except the power control method. However, this post uses

an 8-pin DIN connector, which has a different shape from the COM port connector of the general

personal computers. Also, this connector is supplied a 5V power, which in turn provides power

to an external device such as an OBR. Consequently, although it is possible to develop, on a

personal computer, such a program that uses the COM port, it is not permitted to debug the

program while an external device such as the OBR is being connected to the port.

Restictions regarding the IrDA port

The IT-2000 has installed the hardware to support the IrDA interface, which is controlled by

the dedicated driver.

Many recent personal computers also support the IrDA interface, however, the driver for the

IT-2000 can not be operated on these personal computers because of the difference in the

hardware. The IrDA driver for the IT-2000 has been installed in a form of a COM driver

(COM2) of MS-Windows. Therefore, if the user develops an application program that uses the

COM2 port, it can be operated with the IrDA driver of the IT-2000. Note, in this case, that the

IrDA driver on the IT-2000 is a subset of the COM port driver of MS-Windows.

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 296 297

Keine Kommentare

Casio IT-2000W Spezifikationen Seite 156