Casio IT-2000W Spezifikationen PDF herunterladen (Seite 126)

126

SetCommEventMask

UNIT FAR *SetCommEventMask(idComDev, fuEvtMask)

int idComDev;

/* Communication device to be enabled */

UNIT fuEvtMask;

/* Event to be enabled */

The SetCommEventMask function will enable the event included in the event word of the specified

communication device.

< Parameter >

idComDev Specifies the communication device to be enabled. The OpenComm function

returns this value.

fuEvtMask Specifies the event to be enabled. This parameter consists of any combination of

the following values.

EV_BREAK Set if a break state is detected at data input. This functions if

9-Wire or 3-Wire connection is established.

EV_CTS Set if the status is changed by the CTS (clear to send) signal.

This functions if the 9-Wire connection is established.

EV_CTSS Set if the current status of the CTS signal is indicated.

This functions if the 9-Wire connection is established.

EV_DSR Set if the status is changed by the DSR (data set ready) signal.

This functions if the 9-Wire connection is established.

EV_ERR Set if the line status error occurs. The line status error will be

either CE_FRAME, CE_OVERRUN or CE_RXPARITY.

This functions if the 9-Wire or 3-Wire connection is established.

EV_PERR Not supported.

EV_RING Set if the ring indicator status is indicated during the last modem

interrupt. This functions if the 9-Wire connection is established.

EV_RLSD Set if the status is changed by the RLSD (receive line signal detect)

signal. This functions if the 9-Wire connection is established.

EV_RLSDS Set if the current status of the RING signal is indicated. This

functions if the 9-Wire connection is established.

EV_RXCHAR Set if a character is received and placed in the reception queue

EV_RXFLAG Not supported.

EV_TXEMPTY Set if the last character in the transmission queue is send out.

< Return value >

Returns a pointer that indicates the current event word of the specified communication device if the

function is terminated normally. Each bit of the event word represents whether the specified event

occurred. If the event actually occurred, the corresponding bit is set to 1.

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 296 297

Keine Kommentare

Casio IT-2000W Spezifikationen Seite 126