Casio XW-PD1 Bedienungsanleitung PDF herunterladen (Seite 17)

Mastering TRACKFORMER Operations

EN-15

Grouping Pads

Sounding a grouped pad while the sound of another

one of the group’s pads is sounding will cause the

previous pad’s sound to stop. TRACKFORMER

supports configuration of two groups per bank. This

function is supported only while TRACKFORMER

settings are configured as described below.

Tone type of all pads: Drum

Pad tones: Sound or sample

Enter the PAD ACTION mode.

Press a pad you want to include in the group.

Press sequence step key 8 (Group 1) or 9

(Group 2) to assign a group number.

This causes the sequence step key you pressed to flash

and adds the pad you selected in step 2 to the group.

• To remove the pad from the group, press sequence

step key 8 or 9 again so the key stops flashing and

remains lit.

Repeat steps 2 and 3 to add other pads to the

group.

Entering the TOGGLE Mode

You can configure a pad to remain depressed until you

press it a second time.

Enter the PAD ACTION mode.

Press the pad you want to configure.

Press sequence step key 11 so it is flashing.

This puts the pad in the TOGGLE mode.

• Each press of sequence step key 11 toggles the

TOGGLE mode between enabled (flashing) and

disabled (lit).

Configuring the Effect Target

You can configure settings so effects are applied to a

particular bank, or to the internal sound source or

external sound source only.

NOTE

• This setting can be changed while the pad type is

effect.

Enter the PAD ACTION mode.

Press the pad you want to configure.

Use the sequence step keys to select the

effect target.

Setting

Display

Message

Sequence

Step Key

Status

Description

All 13, 14,

15: Lit

Effects are applied to all

sounds.

Current

Bank

13: Flashing Effects are applied to

the currently selected

bank only.

Internal 14: Flashing Effects are applied to

the internal sound

source (Internal) or

external sound source

(External) only. Each

press of this key cycles

the setting in the

following sequence:

Internal sound source

3 External sound

source 3 Disabled

(Off).

External

Bank 1 15: Flashing Select the bank to

which you want to

apply the effect. Each

press of this key cycles

the setting in the

following sequence:

Bank 1 3 Bank 2 3

Bank 3 3 Bank 4 3

Disabled (Off).

Bank 2

Bank 3

Bank 4

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 40 41

Kommentare zu diesen Handbüchern

Keine Kommentare

Casio XW-PD1 Bedienungsanleitung Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumente Casio XW-PD1