Casio QV-200. Bedienungsanleitung PDF herunterladen (Seite 18)

Symptom Probable Cause Action

1. Unprotect the page

you want to delete

(page 50).

2. Change to a normal-

size, 1-page display

format.

Remove batteries and

disconnect the AC adap-

tor if you are using one.

Restore power and turn

the camera on. If this

does not work, contact

your dealer or an author-

ized CASIO service pro-

vider.

Adjust the BRIGHT set-

ting (page 11).

Remove batteries and/or

unplug the AC adaptor.

Reload batteries and/or

plug in AC adaptor and try

operation again.

Adjust the BRIGHT

(brightness) setting.

1. Connect correctly

(page 58).

2. Turn power on after

connecting cable.

3. Set function switch to

PLAY (page 31).

1. All pages are pro-

tected.

2. Multi-page display

(page 34) or zoom dis-

play (page 36)

Malfunction due to static

electrical charge or strong

impact

Wrong BRIGHT setting

Malfunction due to expos-

ing camera to electro-

static charge.

Incorrect BRIGHT setting

1. Incorrect cable con-

nection

2. Camera connected to

is not turned on.

3. Function switch sets to

REC.

Delete opera-

tion does not

start when DEL

is pressed.

All buttons and

switches do not

operate.

Very bright or

very dark LCD

image.

No buttons or

switches oper-

ate.

LCD monitor is

too bright or too

dark.

Cannot ex-

change data be-

tween two cam-

eras

Other

Deletion

Reference

Symptom Probable Cause Action

Pressing MODE

does not change

the FINE→

NORMAL Menu.

Cannot transfer

data (error

keeps occurring)

Keys of con-

nected camera

are disabled.

1. Correct the situation

and try again.

2. Correct the situation

and try again.

3. Change function

switch setting of re-

ceiving camera to

PLAY (page 31).

4. The sending camera’s

protected memory

pages are hidden. Un-

hide protected memory

pages by holding down

[–] while turning power

on (page 52).

5. Replace batteries or

use the AC adaptor

(page 13).

6. Securely reconnect the

cable.

Normal operation will re-

turn when you exit data

communications by press-

ing EXIT.

There are no convertible

images in memory.

1. Sending camera’s

memory is empty.

2. Receiving camera’s

memory is full

3. Receiving camera’s

function switch is in

REC position.

4. The message “ALL

DATA IS PROTECT-

ED” is on the monitor

of the sending camera.

5. Low battery (indicated

)

6. Disconnection of cable

during data communi-

cation

Connected camera op-

eration is disabled during

data communications.

Troubleshooting

Other

Camera is set up to hide protected images, and all

images are protected.

ERROR Error during data communication. Check cable con-

nections and mode settings.

REMAIN No more memory for FINE images. Use MODE to

change to NORMAL Mode, delete some images, or

change resolution of existing images from FINE to

NORMAL.

MEMORY FULL Not enough memory for further recording. Delete

some images from memory or change resolution of

stored images from FINE to NORMAL.

MEMORY EMPTY No images are stored in memory.

ALL DATA IS

PROTECTED

Messages

Reference

Problem with internal memory. Perform the following

procedure.

Important!

The following procedure deletes all images stored in

memory. You can use the optionally available floppy

disk drive (FD-10V) or connection kit (LK-10V/LK-2V)

to make copies of images before deleting them.

1. Holding down the EFFECT

and DEL buttons, turn on

camera power.

2. After checking that the SYSTEM RESET message

is on the display, press the shutter button to per-

form a system reset or turn power off if you do not

want to perform a system reset.

• Never turn off power while the system reset is in

progress! Doing so will damage camera memory

are require servicing by an authorized service

provider!

• Be sure to power the camera using the AC adap-

tor or a new set of alkaline or lithium batteries.

Weak batteries or manganese batteries can re-

sult in a power failure while the system reset

operation is in progress, causing damage to cam-

era memory.

After the final “SYSTEM RESET” confirmation mes-

sage appears, press the shutter button.

The display should return to normal after the system

reset is complete.

Important!

• System reset can result in a change in the order of

images stored in camera memory.

• Corrupted images may be lost entirely.

• If image data is partially corrupted, parts of the im-

age may not be recoverable.

Problem with internal memory. Contact your dealer or

an authorized CASIO service provider.

MEMORY ERROR

#1~#3

CONSULT THE

OWNER’S MANUAL!

SYSTEM RESET

YES → SHUTTER

NO → CALL TECH

SUPPORT

MEMORY ERROR

CONSULT THE

OWNER’S MANUAL!

1 2 ... 13 14 15 16 17 18 19

Kommentare zu diesen Handbüchern

Keine Kommentare

Casio QV-200. Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kameras Casio QV-200.