Casio IT-800 Series Spezifikationen PDF herunterladen (Seite 25)

5.1.1

5.1.2

ActiveSync via USB

To establish connection via USB interface with PC runs in Windows XP or any other OS earlier

than Windows XP, use ActiveSync.

Follow the steps below:

1. Install ActiveSync to the PC, if not installed.

2. Connect the USB cable to the PC and the other end to the USB Cradle and also the AC adaptor to

the USB Cradle.

3. Make sure the selector switch on the back of the cradle is set to position B.

4. Put the IT-800 on the cradle and confirm that the green LED on the front of the cradle is lit. If not,

be sure the IT-800 is positioned firmly on the cradle.

5. Follow a message appeared in the ActiveSync on the PC.

Windows Mobile Device Center via USB

To establish connection via USB interface with PC runs in Windows Vista, use Windows Mobile

Device Center (“WMDC”).

Follow the steps below:

1. Install WMDC to the PC, if not installed.

2. Connect the USB cable to the PC and the other end to the USB Cradle and also the AC adaptor to

the USB Cradle.

3. Make sure the selector switch on the back of the cradle is set to position B.

4. Put the IT-800 on the cradle and confirm that the green LED on the front of the cradle is lit. If not,

be sure the IT-800 is positioned firmly on the cradle.

5. Follow a message appeared in the WMDC on the PC.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 59 60

Keine Kommentare

Casio IT-800 Series Spezifikationen Seite 25