Casio DT-X8 Series Bedienungsanleitung

Laser Scanner Library Manual (Version 1.05) CASIO Computer Co., Ltd. Copyright ©2011. All rights reserved. January 2

10 3. Structure The following shows the structure provided by the Laser Scanner Library. Table 3.1 Library structure Structure Description Functi

100 4.59 OBRSetUPCEAddonOptionEx This function sets up the decode options for UPC-E Addon symbology. Calling Sequences [C++] int OBRSetUPCEAddonOpt

101 byMinLength This parameter is for specifying the minimum number of digits. It is fixed to 9 digits and cannot be changed. Always specify 9. byMa

102 4.60 OBRGetUPCEAddonOption This function retrieves the decode options for UPC-E Addon symbology. Calling Sequences [C++] int OBRGetUPCEAddonOptio

103 pMaxLength This parameter is for retrieving the maximum number of digits. See OBRSetUPCEAddonOptionEx function for the values to retrieve. pOutF

104 4.61 OBRSetUPCEOption This function sets up the decode options for UPC-E symbology. Calling Sequences [C++] int OBRSetUPCEOption( BYTE byEnable,

105 Return Values OBR_OK : Normal end OBR_PRM : Parameter error OBR_PON : Open already OBR_NOT_DEVICE : Scanner driver error. In the Device Emulato

106 4.62 OBRSetUPCEOptionEx This function sets up the decode options for UPC-E symbology. Calling Sequences [C++] int OBRSetUPCEOptionEx( BYTE byEna

107 byMinLength This parameter is for specifying the minimum number of digits. It is fixed 7 digits and cannot be changed. Always specify 7. byMaxLe

108 4.63 OBRGetUPCEOption This retrieves the decode options for UPC-E symbology. Calling Sequences [C++] int OBRGetUPCEOption( BOOL *pEnable, BYT

109 pMaxLength This parameter is for retrieving the maximum number of digits. See OBRSetUPCEOptionEx function for the values to retrieve. pOutFormat

11 3.1 M_TBL This structure stores all the setting information for the scanner driver. typedef struct m_tbl{ DWORD Code; BYTE Cd39[6]; BYTE Nw7[

110 4.64 OBRSetIDFOption This function sets up the decode options for Industrial 2of5 symbology. Calling Sequences [C++] int OBRSetIDFOption( BYTE b

111 byMaxLength This parameter is for specifying the maximum number of digits. Any bar code of Industrial 2of5 symbology with its length longer than

112 4.65 OBRGetIDFOption This function retrieves the decode options for Industrial 2of5 symbology. Calling Sequences [C++] int OBRGetIDFOption( BOOL

113 pMaxLength This parameter is for retrieving the maximum number of digits. See OBRSetIDFOption function for the values to retrieve. pOutFormat Th

114 4.66 OBRSetITFOption This function sets up the decode options for Interleaved 2of5 symbology. Calling Sequences [C++] int OBRSetITFOption( BYTE

115 byMaxLength This parameter is for specifying the maximum number of digits. Any bar code of Interleaved 2of5 symbology with its length longer than

116 4.67 OBRGetITFOption This function retrieves the decode options for Interleaved 2of5 symbology. Calling Sequences [C++] int OBRGetITFOption( B

117 pMaxLength This parameter is for retrieving the maximum number of digits. See OBRSetITFOption function for the values to retrieve. pOutFormat Th

118 4.68 OBRSetCode93Option This function sets up the decode options for Code93 symbology. Calling Sequences [C++] int OBRSetCode93Option( BYTE by

119 byMaxLength This parameter is for specifying the maximum number of digits. Any bar code of Code93 symbology with its length longer than the value

12 Table 3.2 M_TBL structure member variables Member Description Functions that use identical setting Code Sets up "Enable" or "

120 4.69 OBRGetCode93Option This function retrieves the decode options for Code93 symbology. Calling Sequences [C++] int OBRGetCode93Option( BOOL

121 pMaxLength This parameter is for retrieving the maximum number of digits. See OBRSetCode93Option function for the values to retrieve. pOutFormat

122 4.70 OBRSetCode128Option This function sets up the decode options for Code128 symbology. Calling Sequences [C++] int OBRSetCode128Option( BYTE b

123 byMaxLength This parameter is for specifying the maximum number of digits. Any bar code of Code128 symbology with its length longer than the valu

124 Notes: 1. IT-600M30U, IT-600M30UC, DT-X7M10U, and IT-300E-35E do not support that Code128 and EAN-128 symbologies without ASCII conversion are o

125 4.71 OBRGetCode128Option This function retrieves the decode options for Code128 symbology. Calling Sequences [C++] int OBRGetCode128Option( BOOL

126 pMaxLength This parameter is for retrieving the maximum number of digits. See OBRSetCode128Option function for the values to retrieve. pOutForma

127 4.72 OBRSetMSIOption This function sets up the decode options for MSI symbology. Calling Sequences [C++] int OBRSetMSIOption( BYTE byEnable, BY

128 byMaxLength This parameter is for specifying the maximum number of digits. Any bar code of MSI symbology with its length longer than the value se

129 4.73 OBRGetMSIOption This function retrieves the decode options for MSI symbology. Calling Sequences [C++] int OBRGetMSIOption( BOOL *pEnable,

13 Member Description Functions that use identical setting Type Sets up read mode. OBRSetScanningType Gain Sets up gain. OBRSetGainControl Buzc

130 pMaxLength This parameter is for retrieving the maximum number of digits. See OBRSetMSIOption function for the values to retrieve. pOutFormat Th

131 4.74 OBRSetIATAOption This function sets up the decode options for IATA symbology. Calling Sequences [C++] int OBRSetIATAOption( BYTE byEnable,

132 byMaxLength This parameter is for specifying the maximum number of digits. Any bar code of IATA symbology with its length longer than the value s

133 4.75 OBRGetIATAOption This function retrieves the decode options for IATA symbology. Calling Sequences [C++] int OBRGetIATAOption( BOOL *pEnab

134 pMaxLength This parameter is for retrieving the maximum number of digits. See OBRSetIATAOption function for the values to retrieve. pOutFormat T

135 4.76 OBRSetRSS14Option This function sets up the decode options for RSS-14 symbology. Calling Sequences [C++] int OBRSetRSS14Option( BYTE byEn

136 byMinLength This parameter is for specifying the minimum number of digits. It is fixed to 14 digits and cannot be changed. Always specify 14.

137 4.77 OBRGetRSS14Option This function retrieves the decode options for RSS-14 symbology. Calling Sequences [C++] int OBRGetRSS14Option( BOOL *p

138 pMinLength This parameter is for retrieving the minimum number of digits. See OBRSetRSS14Option function for the values to retrieve. pMaxLength

139 4.78 OBRSetRSSLimitedOption This function sets up the decode options for RSS Limited symbology. Calling Sequences [C++] int OBRSetRSSLimitedOptio

14 4. Functions List Table 4.1 Basic functions Function Description DT-X11 IT-600 DT-X7 DT-X30 IT-3100 IT-800 IT-300 DT-X8 OBROpen Sets up scannin

140 byMinLength This parameter is for specifying the minimum number of digits. It is fixed to 14 digits and cannot be changed. Always specify 14.

141 4.79 OBRGetRSSLimitedOption This function retrieves the decode options for RSS Limited symbology. Calling Sequences [C++] int OBRGetRSSLimitedO

142 pMaxLength This parameter is for retrieving the maximum number of digits. See OBRSetRSSLimitedOption function for the values to retrieve. pOutFo

143 4.80 OBRSetRSSExpandedOption This function sets up the decode options for RSS Expanded symbology. Calling Sequences [C++] int OBRSetRSSExpanded

144 byMinLength This parameter is for specifying the minimum number of digits. Any bar code of RSS Expanded symbology with its length less than the v

145 4.81 OBRGetRSSExpandedOption This function retrieves the decode options for RSS Expanded symbology. Calling Sequences [C++] int OBRGetRSSExpand

146 pMaxLength This parameter is for retrieving the maximum number of digits. See OBRSetRSSExpandedOption function for the values to retrieve. pOutF

147 4.82 OBRSetRSS14StackedOption This function sets up the decode options for RSS-14 Stacked symbology. In the Device Emulator, the function retu

148 byMinLength This parameter is for specifying the minimum number of digits. It is fixed to 14 digits and cannot be changed. Always specify 14.

149 4.83 OBRGetRSS14StackedOption This function retrieves the decode options for RSS-14 Stacked symbology. In the Device Emulator, the function re

15 Table 4.2 Decoding functions Function Description DT-X11 IT-600 DT-X7 DT-X30 IT-3100 IT-800 IT-300 DT-X8 OBRGetc Retrieves one character from OB

150 pMinLength This parameter is for retrieving the minimum number of digits. See OBRSetRSS14StackedOption function for the values to retrieve. pMax

151 4.84 OBRSetRSSExpandedStackedOption This function sets up the decode options for RSS Expanded Stacked symbology. In the Device Emulator, the f

152 byMinLength This parameter is for specifying the minimum number of digits. Any bar code of RSS Expanded Stacked symbology with its length less th

153 4.85 OBRGetRSSExpandedStackedOption This function retrieves the decode options for RSS Expanded Stacked symbology. In the Device Emulator, the

154 pMaxLength This parameter is for retrieving the maximum number of digits. See OBRSetRSSExpandedStackedOption function for the values to retrieve.

155 4.86 OBRSaveConfigFile This function saves all the settings for the laser scanner driver in the configuration file. In the Device Emulator, the

156 4.87 OBRLoadConfigFile This function changes all the default settings in the configuration file and then loads them to the laser scanner driver.

157 4.88 OBRSetFilter This function sets up the noise filter mode. In the Device Emulator, the function does not perform, but stores the preset va

158 4.89 OBRGetFilter This function retrieves the noise filter mode. Calling Sequences [C++] int OBRGetFilter( DWORD *pMode ) [Visual Basic] Publ

159 4.90 OBRSetFilterOnTimer This function sets up a time span between when decoding bar code data starts and until when the noise filter begins to a

16 Table 4.3 Symbology functions Continue. Function Description DT-X11 IT-600 DT-X7 DT-X30 IT-3100 IT-800 IT-300 DT-X8 OBRSetScanningCode Sets up s

160 4.91 OBRGetFilterOnTimer This function retrieves the time span between when decoding bar code data starts and until when the noise filter begins

161 4.92 OBRSetGainControl This function sets up gain control. In the Device Emulator, the function does not perform, but stores the preset value

162 4.93 OBRGetGainControl This function retrieves gain control. Calling Sequences [C++] int OBRGetGainControl( DWORD *pMode ) [Visual Basic] Publi

163 4.94 OBRSetBarWidthAdjustment This function sets up correction value for adjusting the width of bars of scanned bar code. In the Device Emulator

164 4.95 OBRGetBarWidthAdjustment This function retrieves the correction value for adjusting the width of bars of scanned bar code. Calling Sequences

165 4.96 OBRSetMarginCheckRatio This function sets up threshold values for right and left side space margins for bar code symbol printed inside quadr

166 Note: When a bar code is printed inside of quadrangle, scanning may not be possible because there is not enough left and/or right marginal space.

167 4.97 OBRGetMarginCheckRatio This function retrieves the threshold value of the right and left side space margin for a bar code symbol printed ins

168 4.98 OBRSetDecodeLearningMode This function sets up the scanner learning function. In the Device Emulator, the function does not perform, but st

169 4.99 OBRGetDecodeLearningMode This function retrieves the setting for the Decoder Learning function. Calling Sequences [C++] int OBRGetDecodeLear

17 OBRSetITFOption Sets up scanning with ITF (Interleaved 2of5 ) symbology. Y Y Y Y - Y Y YOBRGetITFOption Retrieves decode options of ITF (Inter

170 5. Notes to Programming 5.1 Scanning Completion Notification A message or an event will be issued by the scanner driver integrated in the ter

171 Setting message notification WndProc()WM_CREATEOBRSetScanningNotification( OBR_MESSAGE, hWnd );WM_CLOSEOBROpen( NULL, 0 );OBRClose();WM_OBR_SCANN

172 Setting event notification hEvent = CreateEvent( NULL, FALSE, FALSE, TEXT( “OBRScanningEvent” ) );OBRSetScanningNotification( OBR_EVENT, NULL );O

173 5.2 Configuration File Format The setting parameters are saved in text format to the configuration file. The parameters saved are described in t

1740Disable CODE39_CHKCH Specify check character output 1Enable Table 5.3 NW-7 option parameters NW7_MIN Specify minimum no. of digits. 1 to 62 (

175 Table 5.6 UPCE Addon option parameters UPCEADDON_MIN Specify minimum no. of digits. 9 (Fixed) UPCEADDON_MAX Specify maximum no. of digits.

176 Table 5.9 ITF option parameters ITF_MIN Specify minimum no. of digits. 2 to 94 (IT-600, DT-X7, DT-X30, IT-800, IT-300, DT-X8) (Note 7) 2 to 9

177 Table 5.11 CODE128 option parameters CODE128_MIN Specify minimum no. of digits. 1 to 98 (DT-X11, IT-600, DT-X7, DT-X30, IT-800, IT-300, DT-X8

178 Table 5.12 MSI option parameters MSI_MIN Specify minimum no. of digits. 1 to 67 (DT-X11) 1 to 57 (IT-600, DT-X7, DT-X30, IT-800, IT-300, DT-X8)

179 Table 5.14 RSS-14 option parameters RSS14_MIN Specify minimum no. of digits. 14 (Fixed) RSS14_MAX Specify maximum no. of digits. 14 (Fixed

18 Table 4.4 Save and Load functions Function Description DT-X11 IT-600 DT-X7 DT-X30 IT-3100 IT-800 IT-300 DT-X8 OBRSaveConfigFile Saves all setting

180 Table 5.17 RSS-14 Stacked option parameters (IT-600, DT-X7, DT-X30, IT-800, IT-300, DT-X8) RSS14S_MIN Specify minimum no. of digits. 14 (Fixe

181 Table 5.22 LED control option parameters 0Disable 1Enable LEDCTRL Set LED setting. 2Enable Disable when scan fails Table 5.23 OutBuff contr

182 Table 5.29 Vibrator control option parameters (IT-600 and DT-X7) 0Disable VIBRATOR Set vibration. 1Enable Table 5.30 Scanning key option p

183 Table 5.35 Decode Customize parameters (DT-X11, IT-600, DT-X7, DT-X30, IT-800, IT-300, DT-X8) (Note 7) 0 No correction. 1 Correct black bar th

184deterioration of scanning bar codes that are printed in a poor quality. If you need to set up the scan width control function, select the setting

19 Table 4.6 Learning functions Function Description DT-X11 IT-600 DT-X7 DT-X30 IT-3100 IT-800 IT-300 DT-X8 OBRSetBarWidthAdjustment Sets up the adj

2 Table of the Contents Editorial Record 5 Chapter 1. Overview 7 Chapter 2. Operation Environment 8 Chapter 3. Structure 10 3.1 M_TBL 11

20 4.1 OBROpen This function sets up the scanner driver effect. The enabled state of the scanner driver will be kept effect until when OBRClose func

21 dwMode This parameter is for setting "Enable" or "Disable" for each bar code symbology which is specified with a sum of the va

22 7. The setting for reading Code128 symbology effect will also make reading the GS1-128 symbology (previously named as EAN-128 symbology) possible

23 4.2 OBRClose This function disables the scanning operations and the laser scanner driver. Calling Sequences [C++] int OBRClose( ) [Visual Basic]

24 4.3 OBRSetLED This function sets up notification mode for the completion of scanning bar code using the integrated LED (Indicator #1 or #2, model

25 4.4 OBRGetLED This function retrieves the status of notification mode with the integrated LED. Calling Sequences [C++] int OBRGetLED( BYTE *pMod

26 4.5 OBRSetBuzzer This function sets up the notification mode for scanning complete with the integrated buzzer. Calling Sequences [C++] int OBRSet

27 4.6 OBRGetBuzzer This function retrieves the buzzer notification mode. Calling Sequences [C++] int OBRGetBuzzer( BYTE *pMode ) [Visual Basic] P

28 4.7 OBRSetVibrator This function sets up the notification mode for scanning complete with the integrated vibrator. Calling Sequences [C++] int OB

29 4.8 OBRGetVibrator This function retrieves the notification mode for scanning complete with the integrated vibrator. Calling Sequences [C++] int

34.42 OBRStopScanning 68 4.43 OBRSetDecodeLevel 69 4.44 OBRGetDecodeLevel 71 4.45 OBRSetScanningCode 72 4.46 OBRGetScanningCode 75 4.47 OB

30 4.9 OBRSetSwingAngle This function sets up the Scan Width Control. The laser beam irradiation width for each angle can be set in the OBR calibrat

31cause a deterioration of scanning bar codes that are printed in a poor quality. If you need to set up the scan width control function, select the s

32 4.10 OBRGetSwingAngle This function retrieves the Scan Width Control mode. Calling Sequences [C++] int OBRGetSwingAngle( DWORD *pMode ) [Visual

33 4.11 OBRSetFocus This function sets up the Scan Verification Beam mode. The Scan Verification Beam is a function that focuses a scanned bar code a

34 4.12 OBRGetFocus This function retrieves the current Scan Verification Beam mode. Calling Sequences [C++] int OBRGetFocus( DWORD *pMode ) [Visua

35 4.13 OBRSetScanningNotification This function sets up the notification method for scanning complete via either "Event" or "Window m

36 Return Values OBR_OK : Normal end OBR_PON : Open already OBR_PRM : Parameter error OBR_NOT_DEVICE : Scanner driver error. In the Device Emulator

37 4.14 OBRGetScanningNotification This function retrieves the scanning completion notification. The setting status for scanning complete notificatio

38 4.15 OBRGetLastEventStatus If the scanning completion notification has been set to "via Event", this function retrieves the factor that

39 4.16 OBRSetScanningKey This function sets up scanning Trigger keys. While the scanner driver is being set opened with OBROpen function, scanning s

44.92 OBRSetGainControl 161 4.93 OBRGetGainControl 162 4.94 OBRSetBarWidthAdjustment 163 4.95 OBRGetBarWidthAdjustment 164 4.96 OBRSetMargin

40 4.17 OBRGetScanningKey This function retrieves the current scanning Trigger keys. While the scanner driver is being set opened with OBROpen functi

41 4.18 OBRSetAllOptions This function sets up all the settings for the scanner driver at a time. Calling Sequences [C++] int OBRSetAllOptions( M_TB

42 4.19 OBRGetAllOptions This function retrieves all the settings at a time for the scanner driver. Calling Sequences [C++] int OBRGetAllOptions( M_

43 4.20 OBRSetDefaultSymbology This function sets up all the settings of the scanner driver to the defaults. Under the condition that the configurati

44 4.21 OBRSetDefaultSymbologyEx This function resumes all the settings of the scanner driver to the factory-defaults. In the Device Emulator, the f

45 4.22 OBRSaveLogFile This function outputs log information about the scanner driver saved in the memory by the scanner driver to the specified log

46 4.23 OBRGetc This function retrieves data for one character from the decoding data storage buffer in the scanner driver. In the Device Emulator,

47 Return Values OBR data (for one character) otherwise OBR_NOT_DEVICE : OBR (the scanner unit) in abnormal state. In the Device Emulator, this va

48 4.24 OBRGets This function retrieves decoded data for one character from the decoding data storage buffer in the scanner driver. In the Device Em

49 pCode This parameter is for retrieving the symbology of decoded data. OBR_NONDT : No data OBR_CD39 : Code39 symbology OBR_NW_7 : NW-7 symbology

5 Editorial Record Manual Version no. Date edited Page Content 1.00 October 2008 Original 11 In Chapter 3.1, a note is added. 82 In Chapter 4.52

50 4.25 OBRGetStatus This function retrieves the status of the decoding data storage buffer in the scanner driver. Calling Sequences [C++] int OBRGe

51 4.26 OBRClearBuff This function clears the decoding data storage buffer in the scanner driver. Calling Sequences [C++] int OBRClearBuff( ) [Visu

52 4.27 OBRSetBuffType This function sets up the output mode for decoded data. Calling Sequences [C++] int OBRSetBuffType( BYTE byType ) [Visual

53 4.28 OBRGetBuffType This function retrieves the decoded data output mode. Calling Sequences [C++] int OBRGetBuffType( BYTE *pType ) [Visual Basi

54 4.29 OBRSetCheckCounter This function sets up the number of validations to carry out for decoded data. In the Device Emulator, the function does

55 4.30 OBRGetCheckCounter This function retrieves the number of times set to carry out validation for decoded data. Calling Sequences [C++] int OBRG

56 4.31 OBRSetScanningTimeout This function sets up a time period for timeout used for scanning bar code. In the Device Emulator, the function does

57 4.32 OBRGetScanningTimeout This function retrieves the time period set for timeout used for scanning bar code. Calling Sequences [C++] int OBRGetS

58 4.33 OBRSetSuffixChar This function sets up termination control code that is appended to the end of decoded data before output. Calling Sequences

59 4.34 OBRGetSuffixChar This function retrieves the termination code at the end of decoded data. Calling Sequences [C++] int OBRGetSuffixChar( BYTE

6 125 In Chapter 4.71, the description about the parameters is corrected. 129 In Chapter 4.73, the description about the parameters is corrected. 133

60 4.35 OBRSetScanningType This function sets up scanning mode. In the Device Emulator, the function does not perform, but stores the preset value a

61 4.36 OBRGetScanningType This function retrieves the scanning mode. Calling Sequences [C++] int OBRGetScanningType( BYTE *pType ) [Visual Basic]

62 4.37 OBRSetScanningCounter This function sets up the number of times to carry out continuous scanning. Calling Sequences [C++] int OBRSetScanningC

63 4.38 OBRGetScanningCounter This function retrieves the number of times set for continuous scanning. Calling Sequences [C++] int OBRGetScanningCoun

64 4.39 OBRSetMultiStepReading This function sets up step reading which is described below. In the Device Emulator, it is not possible to retrieve

65 Return Values OBR_OK : Normal end OBR_PRM : Parameter error OBR_PON : Open already OBR_NOT_DEVICE : Scanner driver error. In the Device Emulator

66 4.40 OBRGetMultiStepReading This function retrieves the Multi-step read mode. Calling Sequences [C++] int OBRGetMultiStepReading( BYTE *pMode )

67 4.41 OBRStartScanning This function turns on the laser and initiates continuous scanning. Scanning in the mode can be stopped in mid-course by car

68 4.42 OBRStopScanning This function stops continuous scanning. If this function is called in mid-course while scanning continues initiated with OBR

69 4.43 OBRSetDecodeLevel This function sets up the decoding level in standard level or high level. In the Device Emulator, the function does not

7 1. Overview The Laser Scanner Library provides functions for scanning and decoding scanned bar codes using the integrated laser scanner in the ter

70 Return Values OBR_OK : Normal end OBR_PRM : Parameter error OBR_PON : Open already OBR_NOT_DEVICE : Scanner driver error. In the Device Emulator

71 4.44 OBRGetDecodeLevel This function retrieves decoding level. Calling Sequences [C++] int OBRGetDecodeLevel( DWORD *pMode ) [Visual Basic] Publ

72 4.45 OBRSetScanningCode This function sets up "Enable" or "Disable" for scanning each bar code symbology. Calling Sequences [C

73 Parameters dwMode This parameter is for specifying "Enable" or "Disable" for scanning each symbology using a bit field below.

74 Notes: 1. OBROpen function also can be used to specify each "Enable" or "Disable" status for scanning individual symbology. T

75 4.46 OBRGetScanningCode This function retrieves each "Enable" or "Disable" status for scanning the symbologies. Calling Sequen

76 4.47 OBRSetCode39Option This function sets up the decode options for Code39 symbology. Calling Sequences [C++] int OBRSetCode39Option( BYTE byEna

77 byMinLength This parameter is for specifying the minimum number of digits. Any bar code of Code39 symbology with its length shorter than the value

78 4.48 OBRGetCode39Option This function retrieves the decode options for Code39 symbology. Calling Sequences [C++] int OBRGetCode39Option( BOOL *pE

79 pMaxLength This parameter is for retrieving the maximum number of digits. See OBRSetCode39Option function for the values to retrieve. pOutFormat

8 2. Operation Environment Applicable Handheld Terminals • IT-600 series • DT-X11 series • DT-X7 series • DT-X30 series • IT-800 series • IT-3

80 4.49 OBRSetNW7Option This function sets up the decode options for NW-7 symbology. Calling Sequences [C++] int OBRSetNW7Option( BYTE byEnable, BY

81 byMaxLength This parameter is for specifying the maximum number of digits. Any bar code of NW-7 symbology with its length greater than the value s

82 4.50 OBRSetNW7OptionEx This function sets up the decode options for NW-7 symbology. In the Device Emulator, the function returns always FUNCTION_

83 byMinLength This parameter is for specifying the minimum number of digits. Any bar code of NW-7 symbology with its length shorter than the value s

84 4.51 OBRGetNW7Option This function retrieves the decode options for NW-7 symbology. Calling Sequences [C++] int OBRGetNW7Option( BOOL *pEnable,

85 pMaxLength This parameter is for retrieving the maximum number of digits. See OBRSetNW7OptionEx function for the values to retrieve. pOutFormat

86 4.52 OBRSetWPCAddonOption This function sets up the decode options for WPC Addon symbology. Calling Sequences [C++] int OBRSetWPCAddonOption( BYT

87 Notes: 1. IT-600M30U, IT-600M30UC, DT-X7M10U, and IT-300E-35E do not support reading UPC-B Addon symbology. 2. IT-600M30U, IT-600M30UC, DT-X7M10

88 4.53 OBRSetWPCAddonOptionEx This function sets up the decode options for WPC Addon symbology. Calling Sequences [C++] int OBRSetWPCAddonOptionEx(

89 byMinLength This parameter is for specifying the minimum number of digits. It is fixed to 10 digits and cannot be changed. Always specify 10. byM

9 Table 2.1 Name Space Class Name Description OBReadLibNet.Api Class for function reference CaLib OBReadLibNet.Def Class for constant reference F

90 4.54 OBRGetWPCAddonOption This function retrieves the decode options for WPC Addon symbology. Calling Sequences [C++] int OBRGetWPCAddonOption(

91 pMaxLength This parameter is for retrieving the maximum number of digits. See OBRSetWPCAddonOptionEx function for the values to retrieve. pOutFor

92 4.55 OBRSetWPCOption This function sets up the decode options for WPC symbology. Calling Sequences [C++] int OBRSetWPCOption( BYTE byEnable, BYT

93 Notes: 1. IT-600M30U, IT-600M30UC, DT-X7M10U, and IT-300E-35E do not support reading UPC-B Addon symbology. 2. IT-600M30U, IT-600M30UC, DT-X7M10U,

94 4.56 OBRSetWPCOptionEx This function sets up the decode options for WPC symbology. Calling Sequences [C++] int OBRSetWPCOptionEx( BYTE byEnable,

95 byMinLength This parameter is for specifying the minimum number of digits. It is fixed to 8 digits and cannot be changed. Always specify 8. byMax

96 4.57 OBRGetWPCOption This function retrieves the decode options for WPC symbology. Calling Sequences [C++] int OBRGetWPCOption( BOOL *pEnable, B

97 pMaxLength This parameter is for retrieving the maximum number of digits. See OBRSetWPCOptionEx function for the values to retrieve. pOutFormat T

98 4.58 OBRSetUPCEAddonOption This function sets up the decode options for UPC-E Addon symbology. Calling Sequences [C++] int OBRSetUPCEAddonOption(

99 byCheckChar This parameter is for specifying check character selecting either of the values listed below. OBR_CHKKOFF : Without check character o