Casio MPC-501 Bedienungsanleitung PDF herunterladen (Seite 112)

112

Symptom

Power indicator lamp flashes red

immediately after charging.

FIVA beeps during operation.

FIVA suddenly hangs up.

System runs too slow (1).

System runs too slow (2).

System runs too slow (3).

Displayed date and time are wrong.

The screen temporarily goes white

when FIVA is starting up or when the

display mode is changed.

Recommended Action

Purchase a new battery pack and replace

the current one. Battery packs tend to lose

their ability to charge after long use.

Connect the AC adaptor and charge the

battery. Beeping indicates low battery power.

• If you suspect that the problem is due to

low battery power, connect the AC adaptor

and charge the battery.

• If you suspect that the problem is being

caused by the application you are using,

press the RESET switch and restart

Windows 98.

• Try turning power off and then back on

again.

• Memory may be low, which means you

have to increase it by installing a

separately available DIMM board.

If Power Management is causing the system

to go into the Economy Mode, try changing

the Normal Mode or turning Power

Management off. See page 81.

Turn power off and wait a while. Normal

operation should return after FIVA has a

chance to cool off.

• Use the Control Panel to set the correct

date and time.

• If the date and time seem to require

frequent setting, it may mean that the clock

battery is low. Contact your original dealer

or authorized distributor about having the

clock battery replaced.

This is normal and does not indicate any

malfunction or problem.

General Operation Problems

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 125 126

Kommentare zu diesen Handbüchern

Keine Kommentare