Casio PCR-T273 Wartungshandbuch PDF herunterladen (Seite 18)

SE-G1/PCR-T273/SM-T274

– 16 –

4. DIAGNOSTIC PROGRAM

4-1. Launching The Diagnostic Program

NOTE: If a receipt has been issued in other modes, the Diagnostic Program will not launch.

When this happens, exit and restart the Diagnostic Program. To exit the Diagnostic Program,

see "4-2. Exiting the Diagnostic Program".

(1) Perform initialization.

Remove the memory protection batteries.

If the Power cord is plugged to a power outlet, unplug it.

Wait for 15 seconds, and set the memory protection batteries again.

(2) Set the paper.

NOTE: Unless the paper is set, Error "E 10" is triggered and the program cannot be launched.

(3) Plug the Power cord to a power outlet.

(4) Enter year, month, day, and time.

NOTE: For US, enter month, day, and year in this order.

For other regions, enter day, month, and year in this order.

(5) Insert the mode key and turn on [PGM MODE]

(6) Press

99990000s

(7) The diagnostic program starts and the version information of the diagnostic program is

automatically printed.

NOTE: Once the program starts, the status is displayed.

V. xxxx

INI. • • • • • • • • • • • • • • • • x

TEST • • • • • • • • 99990000

← Version

← x=1: Except for US, x=2: US

4-2. Exiting the Diagnostic Program

(1) Turn the Mode Switch to [OFF].

(2) Remove the memory protection batteries.

(3) Unplug the Power Cord.

(4) Wait for 15 seconds, and set the memory protection batteries again.

Memory protection batteries

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 38 39

Keine Kommentare

Casio PCR-T273 Wartungshandbuch Seite 18