Casio EA-200 Technical Reference Bedienungsanleitung PDF herunterladen (Seite 13)

–

Non-triggering Example (Trigger Edge = Rising)

SONIC Trigger

(Trigger Source = 11)

0 Falling

Sampling started when [Sample Value] < [Trigger Threshold]

1 Rising

Sampling started when [Sample Value] > [Trigger Threshold]

2 Difference Falling

Sampling started when [Sample Value] > [Trigger Threshold]

3 Difference Rising

Sampling started when [Current Value] – [Previous Value] > [Trigger

Threshold]

7. Clock Source

0 Timer

Conforms to sampling interval.

10 Same as Trigger Source

Sampled at same timing as Trigger Source.

Timer when Trigger Source is 0, 10, 11.

To trigger at a target threshold, increase or decrease the hysteresis part with

the edge settings to specify the threshold.

However, make sure sampled value is outside of hysteresis range.

Countdown

(Trigger Source = 10)

1–10 Countdown (sec)

* Do not press SETUP, START/STOP, or ON/OFF key during countdown.

SONIC Trigger

(Trigger Source = 11)

Distance (meters)

6. Trigger Edge

Hard trigger

(Trigger Source = 2, 3, 4, 12)

0 Falling

Sampling started when [Sample Value] < [Trigger Threshold]

1 Rising

Sampling started when [Sample Value] > [Trigger Threshold]

2 Both (Rising and Falling)

Hysteresis

Trigger

threshold

At start of trigger detection, sampled

value is greater than hysteresis lower limit.

Does not exceed hysteresis upper limit.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Casio EA-200 Technical Reference Bedienungsanleitung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Taschenrechner, Organisatoren Casio EA-200 Technical Reference