Casio IT-G400 Bedienungsanleitung PDF herunterladen (Seite 33)

E-13

5. Push the battery cover to make sure it is properly

closed.

Tip!

Even when the battery cover lock switch is in the

“Lock” position, if there is a gap between the battery

cover and the Smart Device, the cover is not perfectly

closed. To maintain the waterproof performance, push

the parts indicated by arrows in the ﬁ gure to remove

any gaps.

Precautions for Use

• Do not use any battery packs other than the speciﬁ ed one.

Replacement

1. Turn the screen on.

2. Hold down the Power key until the Power menu is

displayed.

3. Tap “Hot swap” as shown in the ﬁ gure.

4. Tap “OK” as shown in the ﬁ gure and the Smart

Device will switch to the Hot Swap mode. This causes

the charging status LED to turn on red, and once

switching is completed, the charging status LED turns

off.

5. Turn the Smart Device over, slide the battery cover

lock switch to the “Unlock” position and remove the

battery cover.

6. Remove the battery pack as shown in the ﬁ gure.

7. Install the replacement battery pack following steps 3

to 5 of the battery pack installation procedure.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 91 92

Keine Kommentare

Casio IT-G400 Bedienungsanleitung Seite 33